Discover the 13 Easiest and 11 Most Discreet Ways to Make a Homemade Pocket Pussy!

What is a pocket pussy?

A pocket pussy, sometimes referred to as a “pocket pal,” is a hand-held sex toy designed to provide users with an intimate sexual experience. It is typically made from a soft material such as silicone or latex and can be used for either solo masturbation or partnered play. Unlike traditional vibrators or dildos, the pocket pussy does not require any external power source; it uses your own body heat to create stimulation. While there are a number of commercial products available on the market today, many people choose to make their own homemade pocket pussies for a more personalized experience.

Creating your own homemade pocket pussy is relatively easy and only requires a few simple materials: an elastic material such as fabric lycra, rubber latex or neoprene, some lubricant (preferably water-based), and whatever you would like to use for stimulation (such as beads, feathers, etc.). To begin, cut the elastic material into two equal pieces that are large enough to cover your hand (including the thumb). The pieces should fit snugly but still allow some room for movement. Next, apply lubricant generously over both pieces of fabric before combining them together in order to form a pocket which will act as the “pussy” itself. Finally, insert whatever stimulating items you have chosen into the pocket before using it directly on yourself or during partnered play.

Making your own homemade pocket pussy can be an incredibly enjoyable experience! Not only does it give you full control over how your pleasure device looks and feels – but because it requires no external power sources – you can also enjoy it wherever you may be without worrying about cords or batteries. With just a few materials and minimal effort – anyone can become their own DIY sex toy expert!

The 13 easiest and 11 most discreet ways to make a homemade pocket pussy

If you’re looking for a way to spice up your sex life, then making a homemade pocket pussy is the perfect way to do it. Not only does it provide an incredibly stimulating experience, but it also offers a discreet and convenient way of enjoying yourself without anyone else knowing. Here are 13 of the easiest and 11 most discreet ways to make your own pocket pussy at home.

The first method we’ll look at is using a paper towel roll or cardboard tube. This method involves cutting out openings in the top and bottom of the tube, as well as one side so that it can be inserted into your partner’s body. Once it is inserted, you can use lube or even some water to make the sensation more intense. To add extra stimulation, you can use soft materials such as cotton balls or sponges inside the tube for additional texture.

Another great option for creating your own homemade pocket pussy is using condoms or balloons filled with warm water. Simply fill a condom with warm water and insert into your partner’s body for an incredibly realistic experience. You can also tie knots in either end of the condom before inserting for extra sensation or use multiple condoms for added intensity. If using balloons, simply cut off one end and insert into your partner’s body while squeezing gently on the outside to create suction – this will give them an amazingly pleasurable experience!

You could also use everyday items around the house like socks, t-shirts, sponges and soft fabrics to create an unbelievably stimulating sensation when combined with lube or even just plain water. To begin, simply cut off one end of a sock and place it over your partner’s body before adding lube inside (or water if you prefer). Then slip a t-shirt over their body so that they are completely covered – this will help keep any fluids contained while providing amazing new sensations!

Finally, if you have access to vibrators or other sex toys then these can be used to create unique experiences too – simply place them inside whatever material you are using (condom/balloon/fabric etc) for maximum pleasure! All in all there are plenty of ways to make your own pocket pussy at home – just choose whichever method works best for you both!

1. Use a dish towel to create the pocket pussy

A pocket pussy is the perfect homemade sex toy for those who want to enjoy a little bit of pleasure without spending a fortune on an expensive store-bought model. And, with a few simple items from around your home, you can easily create your own pocket pussy in no time! All you’ll need is some scissors, a dish towel, and some water-based lubricant.

First, start by cutting the towel into two equal-sized rectangles. Next, fold each rectangle in half lengthwise and then roll it up tightly so that it forms a cylinder shape. Now, take one of the cylinders and fold it in half again so that it looks like an open clam shell. Take the second cylinder and fit it inside of the first one to form a pouch – this will be your pocket pussy!

Now that you’ve created your pocket pussy pouch, you’ll need to make sure that it’s nice and secure before use. To do this simply use some tape or rubber bands to keep everything in place. Once you’ve sealed off all sides of the pouch, add some lubricant inside for extra comfort during use – just make sure to be mindful about how much lube you’re adding as too much can cause irritation or even infection if not properly cleaned after use.

Congratulations! You now have your very own homemade pocket pussy ready for action! Just remember to always clean up after yourself when finished playing around with your new toy and always practice safe sex methods when engaging in any kind of sexual activity – even if it’s just with yourself. Enjoy!

2. Use a pillow to create the pocket pussy

Making a homemade pocket pussy is a great way to experience the pleasure of intercourse without having to worry about the cost and availability of store-bought sex toys. While it may sound intimidating, creating your own pocket pussy can be surprisingly easy. All you need is a few basic materials, some patience, and a bit of creativity!

First things first: gather your supplies. At the very least, you’ll need an old pillowcase or fabric scrap large enough to cover your chosen object—which could be anything from a banana to a bottle or even a small stuffed animal. You’ll also need scissors, tape, and something like lube or Vaseline (to make sure everything slides smoothly). Optionally, you might want to use condoms if you’re worried about hygiene or using items that may not be completely clean.

Next, it’s time to shape your pocket pussy. Place the fabric over whatever object you’re using as your “penis” and cut out holes for it on either side—these should be wide enough for penetration but small enough that they don’t tear further when put under pressure. Once that’s done, wrap the fabric around the object so that it creates a snug “pocket” for the penis to fit into. Secure this with tape if necessary; otherwise, just make sure there are no loose ends flying around when you move it!

Finally, add some lubricant inside the pocket (or wherever else) so that everything moves more easily during use. Remember: too much lube can make things slippery and difficult to control; use sparingly!

And voila! You now have yourself a homemade pocket pussy—the perfect toy for solo fun or spicing up partnered playtime without spending money on expensive store-bought pieces. Experiment with different objects and fabrics until you find one that works best for you—and enjoy!

3. Use a soda bottle to create the pocket pussy

Making a homemade pocket pussy is a great way to enjoy your own sexual pleasure without having to purchase an expensive sex toy. All you need is a plastic soda bottle, some lube and a few other basic materials. Here’s how to get started:

Step 1: Find the right size of plastic soda bottle for your pocket pussy. You’ll want something small enough that it can fit comfortably in your hand and be easily concealed, but big enough that it will provide adequate stimulation when used.

Step 2: Cut off the bottom of the soda bottle with scissors or a sharp knife. Make sure you leave enough of the bottle so that it is still sturdy.

Step 3: Apply lubricant inside the bottle and around its edges to create a smoother surface and increase sensation when using it.

Step 4: To create more intense stimulation, fill the inside of the bottle with spongy materials such as cotton balls or foam pieces cut from old clothing or bedding. This will also reduce noise during use, allowing for more discreet playtime!

Step 5: Place one hand over the opening of the bottle and move it back and forth for increased stimulation. You can also experiment with different angles and speeds for further enjoyment!

And there you have it – your very own homemade pocket pussy! With just some simple steps, you now have an inexpensive way to bring pleasure into your bedroom without breaking the bank. Enjoy!

4. Use a kitchen sponge to create the pocket pussy

Making your own pocket pussy is easy and can be done with a few simple steps. Start by getting a kitchen sponge that’s sturdy enough to withstand some pressure and won’t break apart easily. Cut the sponge into the desired shape you want; it could be a basic cylinder or something more complex, like a vagina-shaped object. Then, once the shape is cut out, you will need to make the opening at one end of the sponge for insertion. To do this, use an X-acto knife and carefully cut out a small opening – just large enough for your penis to fit in comfortably without fear of tearing or too much friction.

Next, you will need to give your homemade pocket pussy some cushioning. This can be done by wrapping it in fabric or foam before putting it back together again around the edges of the opening that was created earlier. This additional layer of material will help provide comfort during use and ensure that no skin gets caught between the sponge and your penis when thrusting.

Finally, add some lubrication before using your homemade pocket pussy as this will reduce any discomfort caused by friction and make it easier to slide in and out of the tight space inside the toy. With this step complete, you are now ready to enjoy all the pleasure that comes with having your own homemade pocket pussy!

5. Use a snap lid container to create the pocket pussy

Pocket pussies are a great way to pleasure yourself, but they can be expensive. Fortunately, you don’t have to spend your hard-earned cash on them – you can make your own pocket pussy at home!

Start by gathering the materials you need: a snap lid container, silicone sealant, scissors and a ruler. You’ll also want some latex gloves and lubricant (just in case).

Once you have all the necessary items, it’s time to get started. First, use the scissors to cut off the top of the container so that it has an open end. Then measure out a rectangle on one side of the container that is approximately 4 inches long and 2 inches wide.

Using your scissors again, cut out this rectangle so that there is an opening in one side of the container. Now take your silicone sealant and apply it around the edges of this opening – this will help prevent any leaks when using your pocket pussy. Allow about 24 hours for it to dry completely before proceeding.

Once dry, put on some gloves and add lubricant into your new homemade pocket pussy until it is roughly halfway full – don’t forget to close the lid when you’re done! Congratulations – now you can enjoy pleasuring yourself with your own DIY pocket pussy whenever you like!

6. Use a pool noodle to create the pocket pussy

Pool noodles are an incredibly versatile and affordable material that can be used for a variety of DIY projects. In this tutorial, we will show you how to use pool noodles to create a homemade pocket pussy. This is an excellent alternative to purchasing a more expensive toy, and the result can be just as effective.

First, you’ll need to find a pool noodle in the diameter of your choice. It should be thick enough that it won’t collapse when you place pressure on it. Then cut off both ends of the noodle so that it is roughly 8 inches long. Make sure that both ends are even and smooth with no rough edges or sharp corners.

Next, take one end of the pool noodle and make an incision down the length of it using a knife or scissors. You want to make sure that the incision goes deep enough into the foam but not too far so as not to puncture through the plastic casing of the noodle itself. Once you have made your incision, peel back one side of the cut so that it forms a pocket shape within which your penis will fit snugly.

Now comes time for creating your homemade pocket pussy! Take some water-based lubricant (or any other kind if preferred) and generously cover all surfaces that will come in contact with your penis – inside and outside – except for where there may be abrasive areas from cutting or peeling away at foam previously; these should remain dry as they may cause irritation over time if lubricated heavily during use.

Once everything is properly lubed up, insert your penis into the newly created pocket pussy – don’t forget to enjoy yourself in this step! When finished, simply remove your penis from within and discard accordingly once done with use.

By now you should have successfully created a homemade pocket pussy using nothing more than some basic tools and supplies around your home! Whether you’re looking to save money on sex toys or just wanting something new and exciting, this project is definitely worth trying out today!

7. Use a mattress to create the pocket pussy

Making a pocket pussy at home can be an intimidating prospect. It’s not something most of us have done before, but with the right materials and some ingenuity, it is definitely possible. The best place to start is by gathering supplies. You will need a mattress or other type of foam padding, scissors or a knife, latex gloves (or similar), and some lubricant.

First off, you’ll need to decide what shape your pocket pussy will take. Once you’ve decided on the size and shape of your toy, you can begin cutting out the pieces from the mattress foam. Make sure that all your cutouts are roughly the same size so that when they fit together later it won’t be too tight or too loose in any particular area.

Next up is assembly time! Take the cutout pieces and arrange them so that they form a cylinder-like shape with one end closed off and one end open (this part will be used for insertion). You can secure the edges together with tape if you wish, but this isn’t necessary as long as everything fits snugly together without any gaps between pieces.

Now it’s time to give your homemade sex toy some texture! Put on your latex gloves and spread some lubricant over both sides of each piece of foam before pressing them together firmly to create a ridged surface inside the pocket pussy – this is what will create stimulation when using it later on!

Finally, put everything back together again into its original cylindrical shape – don’t forget to leave one end open -and viola! Your very own homemade pocket pussy is ready for use! Just remember to clean it after each use with warm water and soap – or better yet an antibacterial toy cleaner – for maximum hygiene standards.

8. Use an inflatable party balloon to create the pocket pussy

Making your own pocket pussy doesn’t have to be difficult or expensive. All you need is an inflatable party balloon and a few other household items! With this simple DIY tutorial, you can quickly make a pocket pussy that will provide hours of pleasure.

To start, take the inflatable party balloon and blow it up to the size of your desired pocket pussy. You can make it as large or small as you like – just remember that the larger the balloon, the more realistic it will feel when using it. Once inflated, tie off the opening with string or rubber band to keep all of your hard work in place.

Next, take some fabric softener sheets and cut them into thin strips about two inches wide and four inches long. These strips will act as “flesh” for your pocket pussy, giving it an even more realistic feeling when used. Place these strips inside of the inflated balloon, making sure to spread them out evenly throughout so that no one area feels too tight or loose.

Once all of your “flesh” pieces are in place, fill up the rest of the space with lube or water-based lubricant until it reaches your desired level of fullness. The amount you use depends on how much pressure you want during use – if you want something more intense then add more lube; if you want something gentler then add less lube.

Finally, tie off the end tightly with string or rubber bands and then trim away any excess material from around the outside edge with scissors so that everything looks neat and tidy. Your homemade pocket pussy is now ready for use! Simply grab onto both ends tightly before inserting into yourself for ultimate pleasure. Enjoy!

9. Use a kitchen sponge to create the pocket pussy

Making your own pocket pussy can seem like a daunting task, but with just a few simple steps and the right supplies, you can have a fun and functional homemade pocket pussy in no time. The key ingredient is an absorbent kitchen sponge – not only will it act as the “pussy” of the toy, but it also helps to keep any internal fluids contained during use.

To start, cut off two square pieces of sponge that are roughly five inches by five inches each. Place one square on top of the other and secure them together using rubber bands or tape. Once they’re secured firmly together, trim off any excess material so that you have a neat rectangular shape.

Next, cut out an opening at one end of the rectangular shape for your partner to insert their penis into. Make sure that this opening is large enough for comfortable insertion but small enough so that it won’t be too loose or sloppy feeling when it’s used. To make things even more interesting, you can add texture to the inside of your pocket pussy by cutting out different shapes from additional sponges such as circles or hearts before attaching them to the main sponge body.

Finally, wrap your newly created pocket pussy in some cloth or latex so that it looks more appealing and feels better against skin during use. If desired, you can also use lube to enhance sensation during playtime with your homemade toy!

10. Use a glove to create the pocket pussy

Making your own homemade pocket pussy is a lot easier than you might think. With the right materials and a bit of ingenuity, you can create your own pocket-sized pleasure device in no time! All you need is a glove, scissors, and something to act as a stimulator (like a toothbrush or dildo).

First, start by cutting off the fingertips of the glove so that it resembles an open pouch. This will form the basis for your pocket pussy, so make sure that there are no gaps or holes anywhere along the edges. Once this is done, turn the glove inside out so that all seams are hidden from view.

Next, choose something to act as your stimulator. This could be anything from a toothbrush handle to a small dildo – whatever you feel comfortable with! Make sure that whatever you use fits snugly into the opening of your glove and isn’t too big or too small.

Once everything is in place, it’s time to get creative! You can experiment with different positions to find which one works best for you. For instance, if using a toothbrush handle as your stimulator, try inserting it into the side of the glove rather than directly down the middle. This way you can stimulate both sides of your privates at once! Alternatively, if using a dildo try twisting it around inside the glove for extra stimulation.

Lastly, add some lube and enjoy! With just a few simple steps and materials found around most households, anyone can make their own DIY pocket pussy – perfect for those times when traditional sex toys just won’t do!

11. Use a latex rubber glove to create the pocket pussy

Latex rubber gloves are an inexpensive and convenient way to make a homemade pocket pussy. Although the glove does not offer the same sensation as a fleshy toy, it is still possible to create an enjoyable experience with some basic supplies.

To start, you will need to buy a latex rubber glove from your local drugstore or online. Make sure that it is marked as “medical grade” so that it is safe for use with body fluids. Once you have the glove in hand, you can begin constructing your pocket pussy.

First, cut off the top of the glove around the wrist area so that it looks like a tube sock. Next, fill it up with lube or water-based lubricant until it reaches about halfway full. Now take a sharp object such as scissors or a knife and make small cuts along one side of the tube sock shape – this will serve as openings for stimulation points when using your homemade pocket pussy. You can experiment with different sizes and shapes of cuts to find what works best for you.

Once these cuts are made, turn the glove inside out so that the lube or water-based lubricant stays trapped within its walls and keep its shape when squeezed. Finally, roll up each end of the latex rubber glove into tight little circles and secure them with tape or rubber bands – this will help keep everything sealed tight when using your homemade pocket pussy!

For added texture and sensation, consider adding some ribbed condoms inside before closing off both ends – just make sure they are thoroughly cleaned prior to insertion! The possibilities for customizing your own pocket pussy are endless, so feel free to get creative and enjoy yourself!

What materials do I need to make a homemade pocket pussy?

If you’re looking to recreate the experience of a real-life pocket pussy, then you’ve come to the right place! Making your own homemade pocket pussy is surprisingly easy and can be done with just a few materials that you may already have in your home.

First, you will need something to act as a mold for your homemade pocket pussy. This could be anything from an empty roll of toilet paper or paper towel, to an empty plastic bottle or container. The size and shape of this item will determine the final shape of your homemade toy. Make sure it is clean and dry before using.

Once you have chosen the right mold for your toy, it’s time to prepare the material that will give it its texture and feel. You can use just about any type of fabric such as cotton or fleece as long as it is soft and pliable enough to easily form around the mold without tearing or ripping. If using cotton material make sure that it has been pre-washed so that no lint remains on the surface which could cause irritation when used internally.

The next step is to create a lining for the inside of your pocket pussy – this will help prevent any friction against delicate areas during use. Craft foam works well here because it is lightweight and flexible but any soft material will work as long as it doesn’t tear easily when being formed around the mold. Once cut into pieces, glue them together with a strong adhesive such as craft glue or hot glue gun then press firmly onto all sides of the mold ensuring there are no gaps in between pieces where air can escape through during use.

Finally, add some personal touches such as ribbons or beads if desired then attach a string or ribbon at one end so that you can pull out your homemade toy when finished using it – much like removing a tampon! And there you have it – now all that’s left is to enjoy your new homemade pocket pussy!

What is the easiest way to make a pocket pussy?

Making a pocket pussy at home can be a fun and creative way to explore your sexuality in the privacy of your own space. There are a few different methods for making homemade pocket pussies that range from simple to more complex.

For those looking for an easy, low-cost pocket pussy, a simple plastic bottle with the bottom cut off and a hole cut into the top makes for a great makeshift toy. All you need is an empty plastic bottle with the bottom cut off, some scissors or other sharp object to make the hole, and whatever material you want to stuff it with. Some good materials are cotton balls or foam rubber, but you can get creative by using sponges, felt, or even fabric scraps. Once stuffed, simply insert one end of the bottle into the other end to create your pocket pussy!

For those who want something more sophisticated and realistic feeling, there are many options available online including DIY kits that come with everything needed to make custom-made pocket pussies. These kits usually include molds in various shapes and sizes so that you can customize your toy however you like. Typically they also come with skin-safe materials such as silicone which provide a much softer and realistic feel than plastic bottles. After making your mold according to instructions (usually just mixing two compounds together) simply pour in your chosen material and let it dry overnight before use.

No matter what method you choose when making a homemade pocket pussy, always remember safety first! Make sure all materials used are body safe and non-toxic before use as well as using appropriate lubricants during playtime. With these tips in mind you’ll be ready to have lots of safe fun exploring new realms of pleasure!

How do I make a pocket pussy that is discreet?

Making a homemade pocket pussy can be a great way to spice up your bedroom antics. After all, who doesn’t love the idea of having their own discreet personal pleasure device that they can take with them wherever they go? But before you start experimenting with DIY sex toys, there are some important things to consider.

First and foremost, when it comes to any kind of homemade sex toy, safety is paramount. If you’re going to make your own pocket pussy, it’s important to make sure that the materials you use are safe for internal use. Avoid using anything that’s porous or that may contain harmful chemicals like phthalates or BPA. Silicone is often a popular choice as it’s non-porous and easy to clean.

Another thing to consider is the size of the pocket pussy you want to create. Ideally, it should be small enough for easy storage and portability but big enough so that it feels comfortable during use. If you’re looking for something discreet, then perhaps opting for a smaller design might be better than an overly large one – though this will vary from person to person depending on their preferences!

Finally, pay attention to detail when constructing your pocket pussy. You’ll want it constructed in such a way that there aren’t any sharp edges or rough surfaces that could cause discomfort or injury during use. Also think about how you’ll get lubricant inside the device – if needed – as well as how easy it will be to clean and store afterwards.

Creating your own pocket pussy can be an exciting project and offers plenty of creative freedom in terms of design and materials used. Just remember: safety first!

What is the best way to make a pocket pussy with a realistic feel?

Making your own pocket pussy can be a great way to explore your sexuality in the privacy of your own home. A pocket pussy is basically an artificial vagina that can be used for solo pleasure, or shared with a partner.

When it comes to homemade pocket pussies, there are many different approaches you can take depending on what materials you have available and how realistic you want it to feel. Here are some tips for making a pocket pussy with a realistic feel:

1. Start by getting the right materials. For starters, you will need something soft and pliable like silicone or rubber that will act as the “skin” of the pocket pussy. You may also want to get something hard like wood or plastic that will act as the form of the inner structure. Additionally, if you want it to have a more lifelike feel, consider adding items such as beads or marbles inside to give it some texture and vibration when moved around.

2. Put together the form of the inner structure first before covering it with skin-like material. This is important because it ensures that all edges are covered properly so there aren’t any rough spots when using your homemade pocket pussy later on.

3. Once everything is put together and secured tightly, cover it with skin-like material, making sure all edges are completely sealed off so no water seeps in when cleaning later on. Make sure to leave one side open so that you can insert lube and other accessories if desired.

4 Add additional features for extra stimulation such as bumps, ridges or textures for added sensation (optional). If adding these features make sure they’re securely attached before moving onto the next step!

5 Finally, add lube! This helps keep your homemade pocket pussy slippery and comfortable during use– just make sure not to overdo it!

Following these steps should help create an effective and realistic feeling homemade pocket pussy that can provide hours of pleasure!

How can I control the texture and tightness of my homemade pocket pussy?

Making your own pocket pussy can be a fun and rewarding experience. But to get the most out of it, you need to know how to control the texture and tightness of the toy. There are several ways you can do this, depending on what material you use.

If you’re using a latex glove or condom, then you can use different lubricants to change the sensation. Water-based lubes will give a smoother feeling than silicone-based lubes, while oil-based lubes will give a more intense experience. You can also try experimenting with different thicknesses of condoms or gloves so that they become tighter as they move over your penis.

If you’re using an artificial vagina like Fleshlight or Tenga Egg, then there are various ways to adjust the tightness of your toy. Most models come with adjustable caps that allow you to adjust the amount of suction inside the toy for different levels of tightness. Additionally, some models have different textures on the inside which will provide varying levels of stimulation when used in combination with lubricants and adjustable caps.

Finally, if you’re using foam or spongy materials then you can customize their shape by cutting them into different sizes and shapes. This allows for greater control over how tightly it fits around your penis and how much stimulation it provides when used with lubricants and other accessories.

Whatever material you choose for your homemade pocket pussy, remember that experimentation is key in achieving maximum pleasure from your toy! With some trial and error, anyone should be able to find the perfect fit and level of sensation that suits their needs!